The support brackets are an important accessory to connect Retractable Tape Units to walls or surfaces.
These quick-release clips prevent the retractable tape units from detaching from brackets and are used to quickly disconnect the unit after use.
Their locking clips correspond to the holes on the retractable tape units, and to release the connection, simply squeeze the clip.
The support brackets are ideal for logistics, warehousing, and facilities management.
Magnetic Support Brackets can be used to attach to vehicles or metal shelfing where space is limited and posts or cones may be inappropriate. Its soft pads help to prevent any scratching occurring on surfaces.
If your desire is to screw a bracket to a wall, we recommend the Wall Support Bracket, as the magnet version is very strong.
Need to knows
If you want to end a line rather than start a line at a wall with the Support Brackets for Retractable Tape Units, you can purchase our wall or magnetic receiver clips.
*For installation of the wall bracket, we recommend using a screw and roll plug for a chosen surface. The screw head should be at least 10mm in diameter and we suggest using a washer to protect the bracket.
Elite GSS Ltd accepts no liability whatsoever for any damage, loss or injury arising from the installation of this product.
We help to obtain the right solution for your purpose.
Suitable industries and applications
Civil Engineering/ Infrastructure
Construction Sites
Public Footpaths
Size:
Wall Version: 168mm [L] x 124mm [W] x 130mm [H]
Magnetic Version: 168mm [L] x 124mm [W] x 133mm [H]
Material:
Recycled plastic
Functionality
- Cordon off areas from pedestrian/vehicular access by connecting retractable tape units to walls and vertical surfaces
- Queue/waiting management
- Restrict access in car parks
- Holds the bracket securely in place. Designed for permanent or semi-permanent fixtures.
ConnectivityÂ
For the Magnetic version, place the bracket onto a metal surface and click the retractable tape unit into place on the bracket, using the orange locking clip to locate into the four corresponding holes on the tape units.
If you want to end a line at a wall, wall or magnetic receiver clips can be used.
For the Wall version, screw the bracket into the desired position and then click the retractable tape unit into place on the bracket (again, use the orange clip).
Once connected and when no longer needed, simply squeeze the clip to release the retractable tape unit.
Handling & storage
Gloves should be worn when handling this product. We deliver to site in pre-wrapped packs with pallets incorporated and banded with polyester strips, to safely transport and store using mechanical equipment. This may vary for some products.
Support Brackets for Retractable Units - Product Leaflet
Download our Support Brackets for Retractable Tape Units Product Leaflet to read additional information and how they are best used.
Elite GSS Products Brochure
The Elite GSS Products Brochure lists all of our categories and product solutions with detailed information and specifications.
Recycled materials
