The Protection Film Applicator is a tool used to roll protection film onto ground surfaces.
It can apply the film in reverse and forward winding motions and is adjustable to fit either 600mm or 900mm rolls.
The Protection Film Applicator is an efficient accessory to aid the installation of protection film and has three parts.
The frame holds the film in place, the handle grips the applicator, and the roller applies pressure to the film to lay it evenly across hard or carpeted surfaces. It can be disassembled for easy transportation.
It is a relatively inexpensive and easy-to-use tool and when installing, any excess film can be simply trimmed off using a sharp blade.
Before use, ensure that the surface is clean and dry and apply the Protection Film slowly and carefully. Remove any air bubbles using a squeegee or finger pressure.
Elite GSS Ltd accepts no liability whatsoever from any damage, loss or injury arising from the installation and ground conditions on which these products are used.
Whether you are unsure this product is right for the job or you need to choose something specific for the purpose, we can often offer additional solutions out of our extensive range.
Functionality
Connectivity
This product is easy to use. Simply assemble the applicator by inserting the 600mm/900mm silver tube (depending on what size film you have). Insert the Protection Film Roll into the red holders with the adhesive side facing away from the handle.
Unreel the film under the silver roller and push the applicator forward to apply the film.
Handling & Storage
Gloves should be worn when handling this product. We deliver to site in pre-wrapped packs with pallets incorporated and banded with polyester strips, to safely transport and store using mechanical equipment. This may vary for some products.
Waste and Resource Efficiency can often be underestimated when it has been produced on-site until the project is complete. To reduce the impacts of a “throwaway culture” and move towards a world with zero waste, most of our products can be reused or recycled for other projects, which can lead to increased efficiency and profitability for businesses.
